Insights
Risk Management | March 8, 2024
Latest Findings from Our Arch Surveyors: March 2024
Welcome to the latest Arch Surveyors’ Newsletter, sharing essential knowledge and news on current risk management issues affecting businesses across the UK today. ...
Learn more
Risk Management | February 26, 2024
RAAC and the Risk of Asbestos Exposure
Asbestosis is not the historical disease people often think it is. In fact, The Health and Safety Executive (HSE) has said asbestos remains the biggest cause of work-related deaths in the UK with more t...
Learn more
Risk Management | February 15, 2024
Technical Talks: Property Rebuild Costs and Rising Inflation
Rebuilding costs have hit record highs and the risk of underinsurance is now greater than ever....
Learn more
Risk Management | January 24, 2024
Latest Findings from Our Surveyors — Q1 2024
Welcome to the latest Surveyors’ update, our Risk Control Survey Team has remained extremely busy in the last quarter of 2023, with survey requests increasing hugely in number over the last year. But, a...
Learn more
Risk Management | January 22, 2024
The Essentials of Winter Weather Driving
The autumn and winter months can produce some extreme weather conditions which make driving more difficult, and at times, highly dangerous....
Learn more
Risk Management | January 22, 2024
Toolbox Talk: Portable Heaters
In the winter months the use of portable heaters in otherwise unheated areas of premises naturally increases, especially in buildings where fixed heating is impractical....
Learn more
Risk Management | November 28, 2023
The Major Threats to Life in the Motor Trade
The annual death rate in the motor vehicle repair industry is 1.6 deaths per 100,000 workers – around four times the average rate across all industries. So, in this potentially hazardous industry it is ...
Learn more
Risk Management | November 28, 2023
The Right to a More Predictable Work Pattern — What’s Changing?
The Workers (Predictable Terms and Conditions) Act 2023 was passed in September 2023. Although no date has yet been set, the introduction of the Regulations that will support this act is likely to come ...
Learn more
Risk Management | November 27, 2023
Toolbox Talk: Spark Erosion Machining
Spark erosion machining – also known as electrical discharge machining (EDM) and, in its conventional form, die sinking – is commonly used in engineering to produce highly accurate dies and moulds with ...
Learn more